manualshive.com logo in svg

Instramed CardioMax, User Manual

Share
Download
Instramed CardioMax User Manual Download Page 31

User manual | 

The equipment

31

Side view

1 - SpO

2

 connector

BCI standard oximetry connector. Adult and child oximetry sensors.

2 - USB connector

USB connector for access to data stored by the AED mode. It can be plugged 

directly to a Windows PC.

3 - NIBP connector

Connector for direct use with the armband.

4 - ECG connector

Connector for ECG cables. Depending on the parameters present in the equipment, 

it may be available in the following settings:
•  3 or 5-wire - AAMI standard. Protected against defibrillation.
•  10-wire (optional) - allows up to 12 simultaneous leads. This connector 

substitutes the standard connector and is not compatible with the 3 or 5-wire 

cables.

The photos in this manual are merely illustrative. The connections are 

placed correctly according to the images. The art on the labels may be 

altered in accordance with the requirements of the applicable standards.

2

5

1

6

7

8

9

4

3

Summary of Contents for CardioMax














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands