User manual |
Care and maintenance
169
CLEANING THE ACCESSORIES:
For the ECG cable:
• Clean the cable, the connection box and the surfaces of contact with the patient
with a soft cloth moistened with water or neutral desinfection solution, dry the
cable to use again.
• The cleaning must be periodic.
• Keep the cable plugs dry, since a wet plug may cause some kind of failure.
For the SPO
2
sensor and cable:
• The cleaning process is specified in the accompanying instructions.
For the NIBP cuff and connection:
• The cleaning process is specified in the accompanying instructions.
For the CPR MAESTRO:
• Moisten a cloth with clean water and neutral detergent and clean the device until
all dirty is removed.
• Use a second dry cloth to remove excess of liquid and/or foam.
• Moisten a third cloth with Alcohol 70
o
and pass lightly on the product.
IMPORTANT RECOMMENDATIONS:
• Never immerse in liquid and never spill liquid of any kind on any part of the equip-
ment.
• Do not use any other cleaning products not recommended by this manual.
NEVER sterilize any parts of the equipment, regardless of the sterilization
method, as this would damage the mechanical structure and compromise
the product's operation.
The recommendations above will ensure that the device will withstand,
without damage or deterioration of safety factors, the necessary cleaning
process.
