manualshive.com logo in svg

Instramed CardioMax, User Manual

Share
Download
Instramed CardioMax User Manual Download Page 152

User manual | 

PC connection

152

SoftDEA Installation

•  Insert the program CD in the CD/DVD ROM drive.
•  If the autorun does not start automatically, find the “softdeasetup.exe” file in the 

CD and double-click it.

•  Follow the installation instructions which will show up on the screen.

Connecting the CardioMax to a PC

•  Connect the equipment only after installing SoftDEA.
•  After the installation connect the device through an USB cable.
•  The location of the device drivers to be installed will be required. They can be 

found in this folder: C:\Program Files\Instramed\SoftDEA\DRIVERS.

•  Start the SoftDEA application.
•  On the language selection screen, choose among Spanish, English or 

Portuguese. You only have to select a language the first time you start the 

software.

•  Start the list of events and ECG waveform display following the steps in the next 

section.

Summary of Contents for CardioMax














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands