User manual |
Care and maintenance
174
3 -
Insert the new paper roll between the side clips. The paper roll should be posi-
tioned as shown above. The side with thermal sensitivity, which corresponds to the
marking with millimeter lines, must be side up.
4 -
Pull out the paper to unroll approximately 10 cm.
5 -
Align the paper with the printer door.
6 -
Close the printer door. The printer is ready for operation.
Returning components
If CardioMax must be returned for repair, call Instramed for shipping instructions. To
facilitate assistance be prepared to provide the equipment's series number.
If possible, use the original equipment’s packaging. If this is not possible, use an
equivalent box that provides adequate protection for the monitor.
Repairs
Please contact Instramed at +55 (51) 3073 8200 or at [email protected]
or [email protected] in case of repairs or further doubts.
In order to help us assist you, please be ready to inform the equipment’s serial
number.
In case you send us the equipment for repairs, try to use its original packaging. If it
is not possible, use proper packaging and protect the monitor well.
