Inficon ULTRATEST UL3000 Fab, Translation Of The Original Operating Instructions

Page: 89 / 140

INFICON Warning and error messages | 7
UL3000-Fab-Operating-instructions-iina73en1-08-(1910) 89 / 140
Type Notification Possible sources of
error
Remedy
W110 Real-time clock was reset!
Please enter date and time
The real-time clock has
not been set
• Enter the correct date and time
• Check that the message does not appear
when you restart the device
Battery jumper on the
MSB not set
• Contact customer service
Rechargeable battery
on MSB is discharged
or defective
• Contact customer service
Real-time clock
defective
• Contact customer service
W122 No response from the BUS-
Modul
Connection to BUS
module interrupted
• Check the connection to the BUS module
• Replace the connection cable to the bus
module
Bus module defective • Replace the bus module
Bus module connection
on the device defective
• Contact customer service
W125 I/O module no longer
connected
Connection to I/O
module interrupted
• Check the connection to the I/O module
• Replace the connection cable to the I/O
module
I/O module defective • Replace the I/O module
I/O module connection
on the device defective
• Contact customer service
W127 Wrong bootloader version The bootloader is not
compatible with
application
• Contact customer service
E129 EEPROM contains data
from wrong device class
The software of the
basic unit does not
match the EEPROM
• Contact customer service
The EEPROM does not
match this device class
• Contact customer service
W130 Sniffer line not connected The sniffer line cannot
be addressed by the
device
• Check the connection between sniffer line
and the device (disconnect and
reconnect)
• Contact customer service
Sniffer line defective • Use another sniffer line, if possible
• Contact customer service