Inficon ULTRATEST UL3000 Fab, Translation Of The Original Operating Instructions

Page: 76 / 140

6 | Operation INFICON
76 / 140 UL3000-Fab-Operating-instructions-iina73en1-08-(1910)
1
> Setup > Data recording
2
To record immediately after starting a measurement, activate the option
"Enabled".
Note: Data recording occurs during the measurements, i.e. while the
measurement screen is displayed. See also "Display measurement cycles
[ } 76]".
ð This option is deactivated as standard. To start or stop a recording without
activating this option press in the measurement display.
3
Under “Export format” select between "CSV en", "CSV de" and "JSON".
ð
Standard is "CSV en".
For "CSV en", the column separator is a comma.
For "CSV de", the column separator is a semicolon.
"JSON" is a language-independent data format.
ð
Export files have a default name with timestamp and extension (e.g.
icmeas20160720-082829.csv).
4 To export measurement data in addition to the measurement data, such as the
serial number of the device, activate the "Export metadata" option.
ð
Note: If other data is exported in addition to measurement data, this can
increase the effort required for data post-processing.
5
Save .
6.6.2 Display measurement cycles
The measuring cycle is the time between pressing the START button and the STOP
button. You can view the associated information and optionally edit 2 free text fields.
1 > Measurement data > Measurement cycles
ð Stored measurement cycles with ID, start and end time are displayed.
2 To view the details of a measurement cycle, select the desired entry by touching
it and press .
ð
All information related to the measuring cycle is displayed.
3
To export the displayed cycle, connect a USB flash drive (FAT32 formatted) to
the leak detector and press .
4 To edit text in the "Free text 1" and "Free text 2" fields, press .
ð Alternatively, you can edit "Free text 1" and "Free text 2" from the
"Measurement cycles" window. Select an entry by tapping on it and press .
6.6.3 Export measurement data via network
In addition to access to the graphical user interface, you also have the option of
retrieving specific measurement data from your leak detector.