Inficon ULTRATEST UL3000 Fab, Translation Of The Original Operating Instructions

Page: 27 / 140

INFICON Description | 4
UL3000-Fab-Operating-instructions-iina73en1-08-(1910) 27 / 140
4.3.3 Vacuum connections
4.3.3.1 Inlet
The inlet is located on the upper part of the device. This is a DN 25 KF flange.
If you select the vacuum leak test mode, connect the test object or the vacuum
chamber to the flange.
If you are testing applications with dust or dirt, use the O-ring with filter, see
"Shipment, Transport, Storage”. In this case, the pump down times are extended.
Use this inlet also for the connection of the SL200 sniffer line or the test chamber
TC1000.
See also
2
Shipment, Transport, Storage [
}
14]
4.3.3.2 Exhaust
WARNING
Hazardous gases
Depending on the connected container and the gas contained therein, harmful gases
can get into the ambient air via the exhaust filter of the leak detector.
► Make sure you have protection measure to prevent inhaling hazardous gases.
The exhaust is located on the lower side of the device. The exhaust is a tubular
connection with internal and external thread. To connect the exhaust hose adapter
see also “Connect the supplied accessories [
}
39]“.