Inficon ULTRATEST UL3000 Fab, Translation Of The Original Operating Instructions

Page: 115 / 140

INFICON Accessories and interfaces | 10
UL3000-Fab-Operating-instructions-iina73en1-08-(1910) 115 / 140
Fig. 20: The transmitter can be attached to a free spot with the supplied Velcro tape.
Search for the wireless remote control from the leak detector
If you have misplaced the RC1000WL wireless remote control, you can trigger
acoustic signals from the UL3000 Fab or the UL3000 Fab PLUS from this remote
control.
1 > Setup > Accessories > RC1000
2 Select the setting “ON” in the field “Paging request”.
ð The remote control emits acoustic signals.
3 To stop signals from being emitted after finding the remote control, select "OFF"
in the "Paging request" field.
Test chamber TC1000
This test chamber converts the leak detector to a complete workstation, where
hermetically sealed components can be tested. Also as per Standard MIL-STD 883
testing can be performed easily, quickly and accurately. The tests start automatically
once the cover of the chamber is closed. Test parameters such as measurement time,
rejection rate can be set in the “Auto Leak Test” menu. The test is performed
automatically, the result is shown by red and greed LEDs which are located on the test
chamber.
To operate this test chamber you also need a cable extension for the electrical
connection.