Inficon ULTRATEST UL3000 Fab, Translation Of The Original Operating Instructions

Page: 51 / 140

INFICON Operation | 6
UL3000-Fab-Operating-instructions-iina73en1-08-(1910) 51 / 140
To switch between the different diagram presentation press on the lower left of the
measurement screen, see "Assembly of the touchscreen [ } 25]”.
You can select between the following presentations:
• Line graph
• Bar graph
• Circle graph
You can further configure the different diagram presentations. See "Changing the
presentation of the line graph [ } 51]", "Changing the presentation of the bar graph
[
}
52]", "Changing the presentation of the circle graph [
}
53]".
See also
2
Changing the presentation of the line graph [
}
51]
2
Changing the presentation of the bar graph [
}
52]
2
Changing the presentation of the circle graph [
}
53]
6.2.6.1 Changing the presentation of the line graph
Supervisor
ULTRA
Fig. 10: Presentation of the line graph
ü
Operator or Supervisor rights
1
> Display > Line graph
2
In the field "Scaling" select between "Linear" and "Logarithmic".
3
Select between the different viewable ”Decades”.
4
To dynamically adjust the upper and lower limit on the leak rate, activate the
option "Autoscale".