Inficon ULTRATEST UL3000 Fab, Translation Of The Original Operating Instructions

Page: 84 / 140

6 | Operation INFICON
84 / 140 UL3000-Fab-Operating-instructions-iina73en1-08-(1910)
NOTICE
Data loss due to an aborted connection
► Do not switch off the device and do not remove the USB flash drive while the
software is being updated.
ü
Supervisor - rights
1
Copy the file into the main directory of a FAT32 formatted USB flash drive.
2
Connect the USB flash drive to the USB port on the device.
3
> Update > Update basic unit
ð
At the top in the window the active software version of the basic unit is
shown.
If one or more versions of the software are on the USB flash drive the most
recent version is shown on the line below. If this is the same as the version
already installed the background is green, otherwise it is red.
4 In order to load the new software version, press on the button "Update".
ð After completion there is an automatic restart of the system.
6.10.3 Update the software in expert mode
ü Supervisor - rights
1 > Update > Update operating unit/basic unit > Expert
ð Software versions already available on the device are shown in a list.
2 Highlight any of the software versions as required and proceed to step 5.
ð Resetting to an older software version is possible.
3 If alternatively you want to add a new software version, connect a FAT32
formatted USB flash drive with the update file to one of the USB ports of the
device.
4
In order to load the new software version, press on .
5
To activate the new version, select the desired list entry and press .
ð
After completion there is an automatic restart of the system.
6.11 View vacuum diagram
To check the function and the operating state of the measuring system at a glance,
call up the simplified diagram of the vacuum diagram.
► > Vacuum diagram