Image
parameters
Adjust
image
parameters
according to the environment to
ensure the image quality.
Intelligent Event
Detection
rules
Configure
the
necessary
detection rules, such as video
detection and IVS.
Subscribe
alarm
Subscribe alarm event. When the
subscribed event is triggered, the
system will record the event on
the alarm tab.
3
Device Initialization
The device initialization is a mandatory step for first-time use. This manual is based on the operation
of the web interface. You can also initialize the device through the ConfigTool, NVR, or platform
ITM-9000.
●
To ensure the device's security, keep the password properly secured after initialization and
change the password regularly.
●
When initializing the device, make sure the PC IP and device IP are on the same network.
Step 1
Open a web browser, enter the IP address of the device in the address bar, then press the
Enter key.
The IP is set on DHCP (or 192.168.1.108 if it is not plugged into a network with DHCP) by
default.
Figure 3-1 Device initialization
Step 2
Set the Region, Language, and Video Standard (NTSC for North America) and then click
Next
.
Step 3
Set the Time Zone settings and then click
Next
.
Figure 3-2 Time Zone Setting
5
