Figure 4-80 SNMP (2)
Step 2
Select SNMP version to enable SNMP.
●
Select
V1
to only process information of V1 version.
●
Select
V2
to only process information of V2 version.
●
Select
V3
, (
V1
and
V2
will
become unavailable.) You can configure user name,
password and authentication type from your server.
Using
V1
and
V2 is
less secure, and
V3
is recommended.
In
Trap Address
, enter the IP address of the PC that has MIB Builder and MG-SOFT MIB Browser
installed, and leave other parameters to the default.
Table 4-27 Description of SNMP parameters
Parameter
Description
SNMP Port
The listening port of the software agent in the device.
Read Community, Write
Community
The read and write community string that the
software agent supports.
You can enter number, letter, underline and dash to
form the name.
Trap Address
The target address of the Trap information sent by the
software agent in the device.
Trap Port
The target port of the Trap information sent by the
software agent in the device.
86
