Advanced
●
Snapshot Angle Filter
: Set snapshot angle to be filtered
during the face detection.
●
Snapshot Sensitivity
: Set snapshot sensitivity during face
detection. It is easier to detect faces with higher
sensitivity.
●
Optimized Time
: Set a time period to capture the clearest
picture after the camera detects a face.
Enable Face Exposure
When a face is detected, the camera can enhance the brightness
of the face to make the face image clearer.
Face Target
Brightness
Sets the face target brightness. The default value is 50.
Face Exposure
Detection Interval
Prevents image flickering caused by constant adjustment of face
exposure. The default value is five seconds.
Pixel Counter
Click Draw Target next to Pixel Counter, and then click and hold
the left mouse button to draw a rectangle. The Pixel Counter will
display the drawn pixel count. Used for estimating pixels on a
target.
Step 7
Set arming periods and alarm linkage actions. For details, see "5.1.1 Alarm Linkage".
Step 8
Click
Save
.
Setting Face Database
Face Recognition cameras typically come with the Face Database function. The faces in the
database can be used to compare with the faces detected. Face database configuration includes
creating face database, adding face picture, and face modeling.
5.10.2.1
Creating Face Database
Face database includes face images, data and other information. It also provides comparison data for
the captured face pictures.
Step 1
Select
Setting
>
Event
>
Face Recognition
>
Face Database Config
.
Capacity Limit
: Shows the usage of the memory.
Figure 5-41 Face database configuration
150
