Step 2 Click
to add the people counting function.
Step 3 Double-click the name to modify the rule name. Select
People Counting
or
In Area No
.
●
People Counting
: The IPC counts the people entering and leaving the detection area.
When the number of counted number of people who enter, leave, or stay in the area
exceeds the configured value, the system will create an event.
●
In Area No.
: The IPC counts the number of people and their duration in the detection
area. When the number of counted people in the detection area or the stay duration
exceeds the configured value, the system will create an event. This function is
available on some select models.
Step 4
Click
Draw Area
to draw a detection area in the image.
●
If selecting
People Counting
, draw the movement directional lines. When targets enter
or leave along the direction line, they will be counted.
●
For the models that support multiple counting rules, different detection areas can be
overlapped.
Step 5
Set parameters.
Table 5-16 Description of people counting parameters
Parameter
Description
OSD
Select the
OSD
checkbox or select the
Enter No.
or
Leave No.
checkbox under
OSD
to display the people counting data in the
image.
Click
Clear
to clear the count.
Flip
Set the viewing angle of the image as
Inclined
or
Vertical
.
164
