Step 1
Select
Setting
>
Camera
>
Conditions
>
Conditions
>
Illuminator
.
Figure 4-40 Illuminator
Step 2
Configure illuminator parameters.
Table 4-14 Description of illuminator parameters
Illuminator
Description
Fill Light
Set
Fill Light
for Active Deterrence (sound and
siren) cameras.
●
IR Mode: If the IR illuminator is enabled, the
white light will be disabled.
●
White Light: If the white light is enabled,
the IR illuminator will be disabled.
●
Smart illumination. The camera will switch
the illuminators according to the
environmental conditions. When the ambient
light reaches the threshold of IR illuminator,
the IR illuminator is enabled. The white light
is enabled when the target appears in
surveillance area, disabled when the target
is out of the surveillance area, and then the
IR illuminator is enabled according to the
ambient light.
When selecting
Smart Illumination
as
Fill Light
, you
need to set the illuminator delay. It is 60 seconds
by default, and the range is 30–300 seconds.
Manual
Allows you to adjust the brightness of the
illuminator manually.
Auto
The system adjusts the illuminator intensity
according to the ambient lighting condition.
Smart IR
52
