Navigate to the
Rule Config
interface of the PTZ camera. The PTZ lock function is automatically
enabled. The locking time is 180 seconds. You can only manually control the PTZ during the locking
time. Click
Unlock
at lower left corner of the
Rule Config
interface to manually unlock the PTZ, and
click
Lock
again to relock the PTZ.
Step 1
Select
Setting
>
Event
>
IVS
>
Rule Config
.
Step 2
Click
on the
Rule Config
interface, double-click the name to modify the rule name,
and then select
Tripwire
from the
Rule Type
drop-down list.
Figure 5-34 Tripwire
Step 3
Click
Draw Rule
to draw rule line in the image. Right-click to finish drawing.
For requirements of drawing rules, see Table 5-7. After drawing rules, drag corners of the
detection area to adjust the area range.
Table 5-8 Description of IVS analysis
141
