Step 2
Select
Network Access
from
Rule Type
list, and then select the
Enable
checkbox.
●
Enable
PING prohibited
and
Prevent Semijoin
, and click
Save
. You do not need to
configure parameters.
●
Enable
Network Access
, and configure allowlist and blocklist.
◇
Select the mode:
Allowlist
and
Blocklist
.
◇
Click
Add IP/MAC
.
Figure 4-120 Add IP/MAC
Step 3
Configure parameters.
Table 4-42 Description of adding IP/MAC parameters
Parameter
Description
Rule Type
Select IP address, IP segment, MAC address or all IP addresses.
●
IP address: Select the IP version and enter the IP address of
the host to be added.
●
IP segment: Select IP version and enter the start address
and end address of the segment to be added.
●
MAC address: Enter MAC address of the host to be added.
●
All IP addresses: Set all IP addresses in allowlist or restricted
list.
Device All Ports
Set access ports. You can select all ports or the ports in defined
areas.
●
Device all ports: Set all IP port in allowlist or Blocklist. When
selecting
BlocklList
in
Mode
, and
All IP Address
in
Rule Type
,
Device Start
Server Port
117
