![background image](http://html1.mh-extra.com/html/icom/ic-9700/ic-9700_advanced-manual_611036144.webp)
11-5
11. ABOUT THE DV GATEWAY FUNCTION
Internet
Internet
D
When connecting your device to the Internet using a router (Continued)
Setting up a network
3. Port forwarding
When using a router, enable communication with the Internet, as described below.
• Forward the port number 40000 to the transceiver, Windows, or Android device.
• “UDP” should be used as the port protocol.
• Set a static local IP address in Procedure 2 (2. Setting a static local IP address) as a destination port.
L
Ask the router’s manufacturer about how to forward the port.
L
Only one transceiver, Windows, or Android device connected to the router can use the DV Gateway function at the same
time.
L
Depending on the router settings, you must configure the IP filter settings. Check the router’s manual on how to configure
the settings.
When using the Internal Gateway function, go to “Setting up the transceiver.” (p. 11-8)
When using a Windows device, go to “Setting up the RS-MS3W.” (p. 11-10)
When using an Android device, go to “Setting up the RS-MS3A.” (p. 11-11)
*
1
A static IP address to the transceiver, Windows, or Android
device is recommended.
*
2
Forward port number 40000.
OPC-2350LU
OPC-2350LU
*
1
*
1
*
1
*
2
*
2
*
2
Needs a Global IP address.
LAN cable