Icom IC-9700 Advanced Manual Download Page 147

Page: 147 / 173

11-8

11. ABOUT THE DV GATEWAY FUNCTION

Setting up the device

When using the Internal Gateway

function

Connecting the LAN cable

Connect the transceiver to the router using the LAN

cable.

Setting the Internal Gateway Settings

1. Open the INTERNAL GATEWAY SETTINGS

screen.

MENU

» (2) > DV GW >

Internal Gateway Settings

2. Touch to select the item to set.

(Example: “Terminal/AP Call sign”)

Gateway Repeater (Server IP/Domain)

Enter the RS-RP3C’s gateway repeater address or

domain name.

The address consists of up to 64 characters.

NOTE:

You must have your call sign registered to

the gateway server that has the RS-RP3C installed.

Ask the gateway repeater administrator for details.

Terminal/AP Call sign

Enter the Terminal/AP call sign that is registered

as the access point on the RS-RP3C’s Personal

Information screen.

The call sign consists of 8 characters.

• Enter spaces before the 8th character if necessary.

•

Enter a desired ID suffix between A to F for the 8th

character.

Gateway Type

(Default: Global)

Select the gateway type.

Select “Global” when operating outside of Japan.

Allowed Call Sign (Access Point Mode)

(Default: Disable)

Select to use the call sign restriction for the Access

Point mode. When “Enabled” is selected, this allows

only stations with registered call signs to transmit

through the Internet.

• Disabled: Allows all call signs to transmit.

• Enabled: Allows only the call sign entered on the

“Allowed Call sign List” to transmit. (See

the next page.)

When using the Terminal mode, select “Disabled.”

To the [LAN] port

LAN cable

Router

IC-9700

3. Enter a call sign, and then touch [ENT].

See right for details on the setting items and their

options.

4. To close the INTERNAL GATEWAY SETTINGS

screen, push

EXIT

several times.

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands