Icom IC-9700 Advanced Manual Download Page 164

Page: 164 / 173

12. DD MODE OPERATIONS

12-1

About the DD mode

Setting your PC

To operate in the DD mode, you need a network

environment Local Area Network (LAN).

The communication in the DD mode is Peer to Peer.

Refer to your PC manual for PC setting details.

1. Obtain the static IP address

Set a static IP address to your PC.

Note the current IP address before you change it.

Communication without a repeater

Do not set the same IP address between PCs.

Example:

IP address:

192.168.0.100

Subnet mask:

255.255.255.0

IP address:

192.168.0.101

Subnet mask:

255.255.255.0

Communication using a repeater

Set the IP address, subnet mask and the repeater’s

gateway address that are specified by the repeater

administrator.

Example:

Server

Repeater

Repeater Internet

Gateway IP address:

10.0.0.9

IP address:

***.***.***.***

Subnet mask:

255.0.0.0

Default gateway:

10.0.0.9

• Data communication at 128 kbps

Data

• Data can be sent through an internet connection to

another station or through another repeater

Server

Repeater

Repeater Internet

Data

Server

Repeater Internet

Browsing web sites

While in the DD mode and the “TX INHIBIT” is set

to “OFF,” the data is automatically sent when data is

input from a PC. The received data is output on the

PC.

Each push of

TRANSMIT

toggles the “TX INHIBIT” ON

or OFF.

You can change data output setting.

MENU

» SET > DV/DD Set >

DD Packet Output

PRECAUTION

•

While the transmission inhibit is OFF, files in the shared

folder may be modified or deleted, or unknown file(s)

may be copied into the folder by other station.

• Icom assumes no responsibility whatever for any

damages or lost profits resulting from opportunities for

signal communications being lost because of the failure,

malfunction, poor condition, damage, or data loss of this

unit or because of such external causes as power failure.

Icom also dismisses all responsibility for demands made

by a third party.

• Since the transmitting data is not encrypted, the data can

be received and decrypted by other stations.

• Connect the IC-9700 and PC using an Ethernet cable

for Data mode operation before starting the DD mode

operation. (see p. 12-2)

• Disconnecting the PC from any other network, ISP, LAN,

and so on, is recommended. A network error may occur.

•

For data transferring (PC-to-PC communication), a fixed

IP address must be set, and folder is shared in the same

workgroup between both PC.

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands