Icom IC-9700 Advanced Manual Download Page 83

Page: 83 / 173

8-36

8. GPS OPERATION (ADVANCED)

GPS SET

MENU

» GPS > GPS TX Mode >

GPS

GPS Sentence

(Default: GGA)

Select sentences to be transmitted in the GPS mode

to transmit position data. Set to between RMC, GGA,

GLL, VTG, GSA, and GSV.

NOTE:

Set the GSV sentence to OFF when

sending the GPS message to conventional digital

transceivers.

The GSV sentence is incompatible with them.

Information

• Up to 4 GPS sentences can be set at a time.

• Displays “

✓

” when the sentence is set to ON.

• Even if

GPS Auto TX

is set to “5 sec,” when 4

sentences are selected, the time is automatically

changed to “10 sec.” (p.8-41)

• “VTG,” “GSA,” and “GSV” sentences is not

transmitted when your position has been manually

set.

GPS Message

Enter a GPS message of up to 20 alphanumeric

characters. (p. 8-20)

NOTE:

When you do not want to send a message,

delete the entered message.

TIP: Contents of GPS sentence

The Time Stamp is displayed based on the UTC (Universal Time Coordinated) time.

Sentence

Lon/Lat

Alt

GPS Time

Stamp

(UTC)

Date

(UTC)

Status

2D/3D

COG

(True)

SOG

(knot)

RMC

✔

GGA

✔

GLL

✔

VTG

✔

GSA

✔

GSV

Sentence

Others

RMC

Magnetic variation, Mode Indicator

GGA

Number of satellites in use, HDOP, Geoidal separation, Age of Differential GPS data

Differential reference station ID

GLL

Mode Indicator

VTG

COG (Magnetic north), SOG (km/h), Mode Indicator

GSA

PRN number of satellites used in solution, PDOP, HDOP, VDOP

GSV

Total number of sentences, Sentence number, Total number of satellites in view, Satellite information (ID,

Elevation, Azimuth, S/N)

MENU

GPS

GPS Information

Displays the GPS satellite direction, elevation angle,

satellite number, and receiving status. (p. 8-10)

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands