10-6
10. D-STAR OPERATION (ADVANCED)
•
To make a Local Area CQ call
“Local CQ” setting
(p. 9-8)
Set “CQCQCQ” in “TO” (Destination).
•
To make a call to a specific station
“Your Call Sign” setting
(p. 9-9)
Select the station call sign in the Your Call Sign
memory.
•
To make a Gateway CQ call
“Gateway CQ” setting
(p. 9-9)
Select a repeater from the repeater List, if you want
to make a Gateway call.
By rotating [DIAL]
Rotate [DIAL] to select the repeater or Your Call
Sign that is displayed on the DR screen. (This
operation is disabled when “CQCQCQ” is set.)
“CQCQCQ,” a destination repeater, or a station call
sign must be set in “TO” when you make a call in the
DV mode. You have 8 ways to set “TO” (destination).
•
To make a call through a Reflector
“Reflector” setting
(p. 10-12)
Select a reflector you want to call through.
TIP:
After you receive the individual station or
repeater’s signal, the call sign can be captured
by holding down the Call Sign Capture key
(
TONE
RX
→
CS
), and you can quickly and easily
reply to a call.
•
To select from RX History
Setting from RX History
(p. 10-8)
When you receive a call, repeater or caller station
data is saved in RX History.
Select the destination from the record.
•
To select from TX History
Setting from TX History
(p. 10-8)
When you make a call, the destination repeater or
called station data is saved in TX History.
Select the destination from the record.
•
To directly enter the destination station call sign
Direct Input (UR)
(p. 10-9)
Directly enter the destination station’s call sign.
•
To directly enter the destination repeater call sign
Direct Input (RPT)
(p. 10-9)
Directly enter the destination repeater’s call sign.
“TO” (Destination) setting
