Icom IC-9700 Advanced Manual Download Page 117

Page: 117 / 173

10-15

10. D-STAR OPERATION (ADVANCED)

1. Open the RX HISTORY screen.

MENU

» (2) >

2. Touch an RX history memory to view the details.

Information

• The RX history number, the caller’s name (or call

sign), destination, RX message, RX date and time,

“GW,” and “GPS” are displayed.

•“GW” is displayed when a Gateway call is received.

• “GPS” is displayed when the received call includes

position data.

• “UP” is displayed when a repeater uplink signal is

received.

• In the Quick Menu, you can select the following

options.

RX>CS:

Temporarily sets the call sign

into TO.

Call Sign Display:

The received data is displayed

in the Call Sign Display mode.

Name Display:

The received data is displayed

in the Name Display mode.

Add to RPT List:

Adds the repeater’s call sign to

the

Repeater List

Add to Your Memory:

Adds the caller station’s call

sign to

Your Call Sign

Delete:

Deletes the selected RX history.

► Continued on the next page

The icon differs, depending on the D-PRS TX format.

GPS: Position OBJ: Object

ITEM: Item

WX: Weather

When a name is not entered in the DV Memory, the call

sign is displayed.

3. Touch [DETAIL].

•Displays the RX history detail screen.

•Rotate

MAIN DIAL

to select the page.

<1st page>

•

CALLER:

Displays the caller station’s name*

and any note entered after the call

sign.

•

CALLED:

Displays the called station’s name*

“CQCQCQ” is displayed when receiving

a Local Area call or Gateway call.

<2nd page>

•

RXRPT1:

Displays the repeater’s name*

that

was accessed by the caller station.

If the received call was a Gateway

call, this item displays the gateway

call sign of the repeater you received

the call from.

•

RX RPT2:

Displays the repeater’s name*

you

received the call from.

The operating frequency is displayed instead of

above items when the call was not through a repeater

(Simplex call).

When you receive a DV call, the calling station and

the repeater call signs are saved. Up to 50 calls can

be saved. When you receive the 51st call, the oldest

history is deleted.

Even if the transceiver is turned OFF, the RX record is not

deleted.

Viewing the call signs on the RX History screen

RX HISTORY screen (RX01)

Displayed when

a Gateway call is

received.

Received signal mode

History

number

RX message

Received

date and time

Caller station*

A note may be

displayed after “/”.

D-PRS information

•Compass direction

•Distance

•D-PRS symbol

Viewing received call signs

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands