Icom IC-9700 Advanced Manual Download Page 163

Page: 163 / 173

11-24

11. ABOUT THE DV GATEWAY FUNCTION

Troubleshooting

Error messages of the RS-MS3W and the RS-MS3A

If an error message is displayed when clicking (touching) <Start> in the RS-MS3W or RS-MS3A, read the

following chart. If you are unable to locate the cause of a problem or solve it through the use of this chart, contact

your Icom Dealer or Service Center.

MESSAGE

POSSIBLE CAUSE

SOLUTION

REFERENCE

Gateway Repeater (Server

IP/Domain) cannot be found.

• The gateway repeater address is

not correctly entered.

• Correctly enter the gateway repeater

address.

RS-MS3W,

RS-MS3A’s

instruction

manual

• Your Windows or Android device

does not connect to the Internet.

• Connect your Windows or Android

device to the Internet, and check

whether or not you can access to a

web site on the www browser.

–

Terminal/AP Call sign is

incorrect.

• The Terminal/AP call sign is not

correctly entered.

• Correctly enter the call sign.

The call sign consists of 8

characters.

• Enter a space before the

character.

•

Enter a desired ID suffix between

A to F for the 8th character.

RS-MS3W,

RS-MS3A’s

instruction

manual

The USB cable is not

connected.(1

)

• Transceiver connection is wrong.

• Check the connection between

the transceiver and the Windows

device, or the transceiver and the

Android device.

pp. 11-10, 1 1-11

The USB cable is not

connected.(2

)

• The transceiver is not turned ON.

• Turn ON the transceiver.

–

• The transceiver is in the Normal

mode.

• Enter the Terminal mode or Access

Point mode.

pp. 11-12, 1 1-14

Failed to connect to the

network.

• The application cannot create a

socket for sending and receiving

data.

• Check whether or not the port

number (40000/40002) competes

with other application. If so, stop the

competing application.

–

• Restart the RS-MS3W or RS-

MS3A. If an error message does

not disappear, restart Windows or

Android device.

–

A Network error occurred.

• System error occurs when receiving

data from network.

• Restart the RS-MS3W or RS-

MS3A. If an error message does

not disappear, restart Windows or

Android device.

–

Failed to start the service.

• The gateway repeater address or

Terminal/AP call sign is not correctly

entered.

• Correctly enter the gateway repeater

address or Terminal/AP call sign.

RS-MS3W,

RS-MS3A’s

instruction

manual

• System error occurs when the

service started.

• Restart the RS-MS3W or RS-

MS3A. If an error message does

not disappear, restart Windows or

Android device.

–

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands