![background image](http://html1.mh-extra.com/html/icom/ic-9700/ic-9700_advanced-manual_611036102.webp)
9-14
9. D-STAR OPERATION (BASIC)
“FROM” (Access repeater) setting
Set by rotating
MAIN DIAL
:
Rotate
MAIN DIAL
to select a repeater or Your
Call Sign that is displayed on the DR screen. This
operation is disabled when “CQCQCQ” is set.)
TIP:
After you receive the individual station or
repeater’s signal, the call sign can be captured by
holding down the Call Sign Capture key
(
TONE
RX
→
CS
), and you can quickly and easily reply to
a call.
To make a Local Area CQ call:
Set “CQCQCQ” in “TO” (Destination).
To make a Gateway CQ call:
Select a repeater from the repeater list, if you want
to make a Gateway call.
To make a call to a specific station:
Select the station call sign in the Your Call Sign.
To make a call through a reflector:
Select a reflector that is connected to the repeater
you want to call through.
To select from RX History:
When you receive a call, the caller station data is
saved in RX History. You can select the destination
from the record.
To select from TX History:
When you make a call, the destination repeater or
called station data is saved in TX History. You can
select the destination from the record.
To directly enter the destination station call sign:
Directly enter the destination station’s call sign.
To directly enter the destination repeater call sign:
Directly enter the destination repeater’s call sign.