10-33
10. D-STAR OPERATION (ADVANCED)
D
Skip setting for the DR scan
You can set repeaters as scan skip repeaters. The
selected repeaters are skipped for faster scanning.
You can set the skip setting to all repeaters in the
selected repeater group, or to individual repeaters.
L
When a repeater is set as a skip repeater, its “USE
(FROM)” setting is automatically set to “NO.” In that
case, the repeater cannot be selected in “FROM”
(Access repeater) on the DR screen.
<Individual skip setting>
1. Open the REPEATER GROUP screen.
MENU
» (2) > DV/DD Memory >
Repeater List
2. Select a repeater group where the repeater you
set the skip setting is listed.
3. Touch the repeater to be skipped for 1 second.
4. Touch “SKIP.”
• Displays “SKIP” in the upper right corner.
L
Select “SKIP” again to cancel the skip setting.
L
Select “SKIP All ON” to set the skip setting to all
repeaters in the group.
5. Push
EXIT
several times
to close the Repeater List
screen.
TIP:
• When you select “Repeater List” on the FROM
SELECT screen, you can set the skip setting as
described to the left.
• When “FROM” is selected on the DR screen,
push
QUICK
to set the skip setting, as shown
below.
Rotate
MAIN DIAL
to select SKIP, then touch it.
L
Displays “SKIP” in the “FROM” field.
<Group skip setting>
On the REPEATER GROUP screen, push
QUICK
,
then select “SKIP All ON” to skip the repeaters in the
group during the DR scan.
L
To cancel the skip settings in the group, select “SKIP All
OFF.”
Entering new information into the repeater list