Icom IC-9700 Advanced Manual Download Page 28

Page: 28 / 173

3-4

3. VOICE TX MEMORY FUNCTION

VOICE TX SET screen

Auto Monitor

(Default: ON)

Turn the Automatic Monitor function for recorded

audio contents transmission, ON or OFF.

• ON: Automatically monitors transmit audio when

sending a recorded audio.

• OFF: Monitors transmit audio only when the

Monitor function is ON.

Repeat Time

(Default: 5sec)

Set the repeat interval to repeat the voice

transmission. The transceiver repeatedly transmits

the recorded content at this interval.

• Range: 1 ~ 15 seconds

Repeatedly transmits the recorded content for up to

10 minutes.

After 10 minutes have passed, and all of the

recorded content in the memory is transmitted, the

transceiver automatically returns to receive.

This Set screen is used to set the Automatic Monitor

function and the Transmit Repeat Interval.

1. Display the VOICE TX SET screen.

MENU

» VOICE > REC/SET

> SET

2. Touch the setting item. (Example: Auto Monitor)

3. Select an option or set the time.

See below for details of the setting items and their
options.

4. To close the VOICE TX SET screen, push

EXIT

TIP: How to reset to the default setting

Touching the item or its option for 1 second displays

the Quick menu, and then touch “Default” to reset to

the default setting.

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands