![background image](http://html1.mh-extra.com/html/icom/ic-9700/ic-9700_advanced-manual_611036040.webp)
5-7
5. SCANS
∂
F scan and Fine
∂
F scan
Temporary Skip function
∂
F scan and Fine
∂
F scan
Scan
Scan
146.18 MHz 146.19 MHz
146.17 MHz
(Example: Span: ±10 kHz)
Start
Center
Scan edge
Scan edge
Jump
Repeatedly scans within the
∂
F span area. The
scan starts from the center frequency.
L
In fine scan (programmed or
∂
F), the scan speed
decreases when the squelch opens, but the
transceiver keeps scanning. The scan tuning step
changes to 10 Hz when the squelch opens.
D
∂
F scan operation
1. Set the center frequency.
2. Set the operating mode and tuning step.
(Example: FM, 1 kHz)
L
You can also change these settings while scanning.
3. Display the SCAN screen.
MENU
»
SCAN
4. Touch [
∂
F SPAN] several times to select the span.
• Each touch changes the span.
5. Touch [
∂
F].
•
∂
F
scan starts.
Blinks
L
When a signal is detected, the scan pauses
according to the “SCAN Resume” setting, and then
resumes.
L
To turn the TS function to scan by the frequency step
setting, touch the 100 kHz digit on the frequency
readout.
L
To cancel the scan, touch [
∂
F
] again.
6. To switch to the Fine
∂
F scan, touch [FINE].
•The scan frequency step changes to 50 Hz.
Blinks
L
Touching [FINE] switches between the
∂
F scan and
the Fine
∂
F scan.
7. To close the SCAN screen, push
EXIT
.
This function temporarily skips unwanted frequencies
(or memory channels) during a scan for the set
period of time or condition, without changing the Skip
Channel setting.
1. Start a scan.
• When a signal is detected, the scan pauses.
2. Push
QUICK
.
3. Touch [Temporary Skip Set].
• Scan resumes.
TIP:
• Up to 20 Temporary Skip frequencies or Memory
channels can be set. When the 21st frequency or
Memory channel is set, the oldest setting is
automatically deleted.
• The Temporary Skip function is canceled when the
Temporary Skip Timer (Default: 5 min) has passed, or
when selecting “Temp Skip Cancel” in the Quick menu.