Icom IC-9700 Advanced Manual Download Page 166

Page: 166 / 173

12-3

12. DD MODE OPERATIONS

Communication status indication

The communication status in the DD mode

operation is displayed.

Indication

Status

Stand-by
Data receiving

The received data is output to the PC.

[TX/RX] lights green.

Data sending

The IC-9700 is transmitting data. [TX/

RX] lights red.

DD mode operation without a repeater

1. Set the frequency and mode

1. Set the operating frequency in the VFO mode.

(Example: 1293.100 MHz)

2. Select the DD mode.

2. Set the DD repeater simplex mode to OFF

1. Push

FUNCTION

2. Touch (2) to change the screen page.

3. Confirm that [RPS] is set to “OFF.”

Confirm

• Each touch toggles the DD repeater simplex mode

ON or OFF.

4. Push

EXIT

several times to close the FUNCTION

screen.

3. Set the call sign

1. Display the CALL SIGN screen.

MENU

» (2) >

2. Touch [UR].

Touch [UR] for 1 second, to directly enter the call sign.

3. Touch [Your Call Sign].

4. Touch Your Call Sign, then find and touch the call

sign of the station that you want to contact.

5. Push

EXIT

several times to close the CALL SIGN

screen.

6. 4. Cancel transmit inhibit and send the data

1. Push

TRANSMIT

to set [TX INHIBIT] to “OFF.”

2. Confirm that you can find the other station’s

shared folder on your PC.

3. Open the shared folder.

4. Drag and drop, or copy and paste the desired file

on to your folder.

5. After the DD mode operation

Push

TRANSMIT

to set [TX INHIBIT] to “ON.”

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands