Icom IC-9700 Advanced Manual Download Page 8

Page: 8 / 173

1-4

1. ADVANCED OPERATIONS

Keyer set menu (CW-KEY SET)

In this menu, you can set the memory keyer repeat

time, dash weight, paddle specifications, key type,

and so on.

Setting example

1. Display the CW-KEY SET menu in the CW mode.

MENU

» KEYER > EDIT/SET >

CW-KEY SET

2. Select the setting item. (Example: Side Tone Level)

3. Adjust the Side Tone Level. (Example: 80%)

4. To close the CW-KEY SET screen, push

EXIT

several times.

TIP: How to reset to the default setting

Touching the item or its option for 1 second displays the

Quick menu, and then touch “Default” to reset to the

default setting.

Side Tone Level

(Default: 50%)

Adjust the CW side tone output level.

• Adjust to between 0 ~ 100%.

Side Tone Level Limit

(Default: ON)

Turn the CW side tone level limit ON or OFF.

This disables the CW side tone when you rotate

RF/SQL

(inner) above the side tone level.

Keyer Repeat time

(Default: 2sec)

Set the time between Memory keyer transmissions.

•Set to between 1 ~ 60 seconds.

After transmitting a Memory keyer, the transmission is

repeated after the set time period.

is displayed even between transmissions.

Dot/Dash Ratio

(Default: 1:1:3.0)

Set the dot/dash ratio.

•Set to between 1:1:2.8 ~ 1:1:4.5 in 0.1 steps.

Keying weight example:

Morse code “K”

1 1

1 1 2.8

〜

4.5

Default: 1:1:3

Setting range

1:1:2.8

1:1:4.5

Dash

Dot

Setting range

Space

Key action

TX output

power

Set TX output power

Rise time

Time

Rise Time

(Default: 4ms)

Set the rise time of the transmitted CW envelope.

•Set to 2, 4, 6 or 8 milliseconds.

Paddle Polarity

(Default: Normal)

Set the paddle dot-dash polarity to Normal or

Reverse.

•Normal: Right

dash, Left = dot

•Reverse: Right

dot, Left = dash

Key Type

(Default: Paddle)

Set the key type for the [KEY] connector on the rear panel.

•Set to Straight, Bug or Paddle.

When using an external Elec-keyer, select “Straight.”

MIC Up/Down Keyer

(Default: OFF)

Set the microphone [UP]/[DN] keys to use as a CW key.

•ON:

Use the [UP]/[DN] keys as a CW key.

•OFF:

Do not use the [UP]/[DN] keys as a CW key.

The [UP]/[DN] keys do not work as a “squeeze key.”

When “ON” is selected, you cannot change the frequency

and the Memory channels using the [UP]/[DN] keys.

Operating CW (ADVANCED)

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands