Icom IC-9700 Advanced Manual Download Page 132

Page: 132 / 173

10-30

10. D-STAR OPERATION (ADVANCED)

Editing repeater data

You can edit repeater data. This is useful when

already-entered data is incorrect, has changed, or

some data needs to be added to the list.

1. Open the REPEATER GROUP screen.

MENU

» (2) > DV/DD Memory >

Repeater List

2. Touch a repeater group where the repeater you

want to edit is listed.

3. Touch a repeater you want to edit for 1 second.

4. Touch “Edit.”

5. Touch an item, then edit it.

See pages 10-27 ~ 10-29 for details.

6. After editing, touch “<<Overwrite>>.”

•

The confirmation dialog is displayed.

Entering new information into the repeater list

7. Touch <YES>.

• The edited contents are saved into the repeater list,

and returns to the selected repeater group screen.

8. Push

EXIT

several times

to close the Repeater

List screen.

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands