Icom IC-9700 Advanced Manual Download Page 138

Page: 138 / 173

10-36

10. D-STAR OPERATION (ADVANCED)

Deleting Your Call Sign

1. Open the YOUR CALL SIGN screen.

MENU

» DV/DD Memory >

Your Call Sign

2. Touch a call sign you want to delete for 1 second.

3. Touch “Delete.”

•

A confirmation dialog is displayed.

4. Touch <YES>.

• The selected call sign is deleted from the Your Call

Sign list, and the returns to the YOUR CALL SIGN

screen.

5. Push

EXIT

several times

to close the Your Call

Sign screen.

Rearranging the display order of Your

Call Signs

You can move Your Call Signs to rearrange their

display order.

If the stations you often communicate with are moved

to the top of the list, it is easy to find them.

Example:

Moving “Rick” above “Eddy.”

1. Open the YOUR CALL SIGN screen.

MENU

» DV/DD Memory >

Your Call Sign

2. Touch a Your Call Sign to be moved for 1 second.

3. Touch “Move.”

4. Touch the position to insert the Your Call Sign you

want to move the call sign above.

Blinks

• While moving, “DESTINATION” blinks.

• The selected call sign is inserted above the destination

call sign.

If “<<Move End>>” is selected, the Your Call Sign is

moved to the bottom of the group.

5. Push

EXIT

several times

to close the Your Call

Sign screen.

NOTE:

The currently selected Your Call Sign on the

DR screen cannot be edited or deleted. To edit or

delete the Your Call Sign, select another Your Call

Sign on the DR screen.

Your Call Sign

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands