Icom IC-9700 Advanced Manual Download Page 25

Page: 25 / 173

3. VOICE TX MEMORY FUNCTION

3-1

Recording a Voice TX memory

Playing back

1. On the selected memory’s recording screen,

touch

to start playing back without

transmitting.

To stop the playback, touch

While playing

2. To close the VOICE TX screen, push

EXIT

several

times.

You can record up to 8 Voice transmit memories (T1 ~

T8) of up to one and a half minutes in each memory,

onto an SD card. To transmit a recorded content using

a Voice TX memory, first record the message, as

described below.

You can record up to 1 and a half minutes in each

memory.

A user supplied SD card is required to use the Voice TX

memory function.

You can also transmit the recorded content using an

external keypad.

Recording

1. Display the VOICE TX screen in the SSB, AM, FM

or DV mode.

MENU

VOICE

2. Touch [REC/SET].

3. Touch the “REC” item.

• Opens the VOICE TX RECORD screen.

4. Select the desired Voice memory “T1” ~ “T8.”

(Example: T1)

TIP: How to clear the recorded content

Touching the Voice memory for 1 second in step 4

to the left, and then touch “Clear” in the Quick

menu.

5. Touch

to start recording.

• Without holding down [PTT], speak into the

microphone at your normal voice level.

Previously recorded content is overwritten.

Touch to open

the MIC GAIN

adjustment

window

While Recording

Adjust the Mic

gain so that the

“REC Level”

meter reads less

than 80%

6. Touch

to stop recording.

7. To close the VOICE TX screen, push

EXIT

several

times.

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands