![background image](http://html1.mh-extra.com/html/icom/ic-9700/ic-9700_advanced-manual_611036075.webp)
8-28
8. GPS OPERATION (ADVANCED)
GPS Alarm
D
Setting the GPS Alarm function to RX
(a caller station)
1. Open the GPS ALARM screen.
MENU
» GPS >
GPS Alarm
2. Touch “Alarm Select.”
3. Touch “RX.”
L
If you want to set the alarm to a specific GPS
Memory, touch “Memory” and then select a GPS
Memory in a GPS Memory group.
4. To close the GPS ALARM screen, push
EXIT
several times.
L
Information
• When a station with its GPS Alarm set enters
within an approximate 1 kilometer (1094 yard)
range, the alarm sounds once. When it enters
within an approximate 500 meter (547 yard) range,
the alarm sounds 3 times.
• When the transceiver sounds a GPS Alarm, “GPS
ALARM” pops up on the screen, and “ ” blinks.
See the illustration below.
• To cancel the GPS Alarm function, touch “OFF” in
step 3 to the left.
“GPS ALARM” pops up on the screen and the
alarm sounds, depending on the set range.
TIP:
When selecting “RX” or a specific GPS
Memory in step 3 to the left, you also have to set
Alarm Area (RX/Memory)
to use the GPS Alarm
function.
MENU
» GPS > GPS Alarm >
Alarm Area (RX/Memory)
NOTE:
Even if “RX” is selected in step 3, when the
received signal has no position data, the GPS Alarm
does not sound.
Blinks