Icom IC-9700 Advanced Manual Download Page 81

Page: 81 / 173

8-34

8. GPS OPERATION (ADVANCED)

MENU

» GPS > GPS TX Mode > D-PRS >

TX Format >

Item

Comment

Enter a comment.

The number of characters you can enter differs,

depending on the Data Extension and Altitude data

entry.

Data Extension

Altitude

Characters

entered

(maximum)

OFF

—

43 (Default)

OFF

Entered

Course/Speed

—

Course/Speed

Entered

Power/Height/Gain/Directivity

—

Power/Height/Gain/Directivity Entered

The symbol “ ” displays the transmittable comment

range. Please note that the characters that exceed

the range will not be transmitted.

Transmittable comment range display

(In case of up to 28 characters)

Position

(Default: LATITUDE: 0º00

LONGITUDE: 0º00

E, ALTITUDE: ------ft)

Displays the position information of the Item.

Push

QUICK

to open the window shown below.

TIP:

When you select “Capture From GPS” or “Set

From GPS Memory,” you can capture the position

from the GPS, or set the Object’s position from the

GPS memory.

See “Entering the position information manually”

(p. 8-32) for details.

GPS SET

Data Extension

(Default: OFF)

Select whether or not to transmit the Course/Speed

data or Power/Height/Gain/Directivity data along with

the position data in the D-PRS mode.

The number of characters you can enter in “Comment”

differs, depending on the “Altitude” and “Data Extension”

settings.

• OFF:

Does not transmit any information.

• Course/Speed: Transmits the course and speed

data with the position data.

The course and speed data is not

transmitted when your position is

manually set.

• Power/Height/Gain/Directivity:

Transmits the TX power level,

Height, Gain and Directivity data,

along with the position data.

The Power, Height, Gain and

Directivity data is transmitted even if

your location is manually set.

Course

(Default: 0º)

Set the Item’s course to between 0º and 360º.

This item is displayed when “Data Extension” is set to

“Course/Speed.”

Speed

(Default: 0mph)

Set the Item’s speed to between 0 and 1150 mph.*

* If the Speed unit is set to “km/h,” select between 0 to 1850

km/h, or set to “knots,” select between 0 and 999 knot.

This item is displayed when “Data Extension” is set to

“Course/Speed.”

Power

(Default: 0W)

Select the TX power level of Item, to transmit along

with the position data.

This item is displayed when “Data Extension” is set to

“Power/Height/Gain/Directivity.”

Options: Set to between 0, 1, 4, 9, 16, 25, 36, 49, 64,

and 81 W.

Height

(Default: 10ft)

Select the height of the Item’s antenna, to transmit

along with the position data.

This item is displayed when “Data Extension” is set to

“Power/Height/Gain/Directivity.”

Options: Set to between 10, 20, 40, 80, 160, 320,

640, 1280, 2560, and 5120 feet.*

* If the Altitude/Distance unit is set to “m,” select between 3,

6, 12, 24, 49, 98, 195, 390, 780, and 1561 meters.

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands