Icom IC-9700 Advanced Manual Download Page 170

Page: 170 / 173

13. UPDATING THE FIRMWARE

13-1

General

About updating the firmware

You can update the IC-9700’s firmware using an SD

card. Updating the firmware adds new functions and/

or improves performance parameters.

You can download the latest firmware from the Icom

website.

http://www.icom.co.jp/world/

TIP:

You can also check the firmware version on

the INFORMATION screen.

MENU

» SET > Others > Information >

Version

Checking the firmware version

Check the firmware version when you turn ON the

transceiver.

IMPORTANT:

To update the firmware, first format

your SD card using the IC-9700. Then copy the

downloaded firmware data from your PC into the IC-

9700 folder on the card.

The firmware version is displayed

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands