Icom IC-9700 Advanced Manual Download Page 27

Page: 27 / 173

3-3

3. VOICE TX MEMORY FUNCTION

Transmitting a Voice memory content

Information

• The recorded content is repeatedly transmitted for

10 minutes, unless you manually stop transmission

by touching the selected memory.

• The Memory Timer counts down.

•“ ” is displayed while repeatedly transmitting.

• You can set the pause interval between the

repeated transmissions in the “Repeat Time” item

on the VOICE TX SET screen. During this interval,

the transceiver returns to receive. (p. 3-4).

• After 10 minutes have passed, and all of the

recorded content in the memory is transmitted, the

transceiver automatically returns to receive.

• When a signal is received in the interval between

transmissions, the transceiver pauses the next

transmission until the signal disappears. However,

if the squelch is set to open, the transceiver

repeatedly transmits after the repeat interval time

expires, even signals are received.

3. To close the VOICE TX screen, push

EXIT

Repeatedly transmitting

1. Display the VOICE TX screen in a Voice mode.

(Voice modes: SSB, AM, FM and DV).

MENU

VOICE

2. Touch the desired Voice memory key [T1] ~ [T8]

for 1 second.

• Repeatedly transmits the recorded content.

Adjusting the output level

Adjust the Voice TX memory level.

1. Display the VOICE TX screen in a Voice mode.

(Voice modes: SSB, AM, FM and DV).

MENU

VOICE

2. Touch [TX LEVEL].

3. Touch any Voice memory key other than [T4] or

[T8]. ([T1] ~ [T3], [T5] ~ [T7])

•The transceiver automatically transmits.

To adjust the Transmit voice level using [T4] or [T8],

reverse steps 2 and 3.

4. While transmitting, rotate

MAIN DIAL

to adjust the

transmit voice level.

Pushing [DEF] for 1 second returns the value to the

default.

Adjusting TX LEVEL too high may result in an over

modulation and transmit signal distortion.

5. To save and close the VOICE TX screen, push

EXIT

several times.

Playing time

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands