Icom IC-9700 Advanced Manual Download

Page: 150 / 173

11-11

11. ABOUT THE DV GATEWAY FUNCTION

Setting up the device

When using the RS-MS3A

The RS-MS3A is an application for Android device to

use the External Gateway function.

Download the application from Google Play.

System requirements

The following are required to use the RS-MS3A.

(As of March 2019)

•

Android device

Android 4.0 or later with the USB host function

The RS-MS3A has been tested with Android 4.x.x,

5.x.x, 6.x.x, 7.0, and 8.0.

TIP:

The USB host function is needed to use a USB

device with an Android device. To check whether or

not your Android device has the USB host system,

ask the Android device’s manufacturer.

•

Data cable

OPC-2350LU

data

cable

(purchase separately)

NOTE:

Some functions may not be usable, depending on:

• applications installed in the Android device

• memory capacity

For operations or settings of the Android device, read

the Android device’s instruction manual.

Display indications may differ, depending on the OS

version or settings.

Installing the RS-MS3A

1. Start the Android device.

2. Touch “Play Store.”

3. Enter “RS-MS3A.”

Do not abbreviate the application name to search.

4. Touch “ (search).”

5. Touch “RS-MS3A.”

• The RS-MS3A application information is displayed.

If your Android device is not compatible with the

RSMS3A, the application is not displayed.

6. Touch “Install.”

7. Touch “Agree to download.”

• Starts installing the application.

• After the installation is completed, the icon is

displayed on your home screen.

Connecting the OPC-2350LU

Connect the transceiver to the Android device using

the OPC-2350LU.

NOTE:

• Turn OFF the transceiver before connecting or

disconnecting the cable.

• Remove the OPC-2350LU when you do not use

the cable. Otherwise, the battery will be quickly

exhausted.

• If the application selection window is displayed,

select “RS-MS3A” to start the application.

• If your Android device has a USB Type-C port,

you need a USB On-The-Go (OTG) adapter to

convert the data cable’s plug to USB Type-C.

Setting the RS-MS3A

Set the RS-MS3A to start using the DV Gateway

function.

The screen may be different, depending on the

application version.

Read the RS-MS3A instruction manual about each

setting item.

Search by “RS-MS3A.”

http://www.icom.co.jp/world/support/download/firm/

To the [DATA] jack

OPC-2350LU

Android device with

the USB host function

IC-9700

To a USB port

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands