IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 171 / 257

© Copyright IBM Corp. 2008
A-1
Appendix A. Information for Trained IBM Service Personnel
Web User Interface Service Login
The Web User Interface Java Applet requires Java 1.5.0 or higher for full functionality,
and is best viewed using Internet Explorer 6.0 or higher. Internet Explorer 7.0 or
higher is required for IPv6. If your computer does not have Java installed or you need
to upgrade your installation, download the latest version of the Java Runtime
Environment (JRE) for your platform from
http://www.java.com/ and follow the
instructions provided to enable and configure the Java Runtime Environment for
your browser.
The Web User Interface can also be used to update the library and drive firmware,
and to download error logs, drive dumps, and other library data from the library.
Before the TS2900 Tape Autoloader can be managed over a network using the Web
User Interface, you must set up the initial network configuration of the library using
the Operator Panel. For more information, see “Configuring Network Settings” on
page 3-29.
Logging in to the Web User Interface
To log in to the Web User Interface from Internet Explorer, you need to enter the IP
address of the library. The IP address can be obtained using the
View Current
Information command from the Operator Panel. For example, http://192.168.1.1
“Web User Interface Service Login” on page A-1
“Connecting to the Library using the Telnet Service Port” on page A-5
“Drive/Cartridge
Removal” on
page A-5 “Removing/reinstalling the Library Chassis Cover” on page A-5
“Removing/reinstalling the Tape Drive from/in the Library” on
page A-10
“Manually Removing a Tape Cartridge from the Drive” on page A-11
“Removing a Stuck Cartridge Magazine” on page A-21