IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 53 / 257

Chapter 3. Installation and Configuration
3-9
Figure 3-7. Attaching the front brackets to the library chassis
4. Attach the left and right rear brackets to the left and right front rails
using two round-head screws on each side (Figure 3-8).
Note: Run the hook and loop fastener strap through the slot on the right rear
bracket and attach it back upon itself.
Figure 3-8. Attaching the rear brackets to the rails
Important: Do NOT tighten these screws completely at this time.
5. Slide in the rear rails from back to front, to create the rail assemblies. Ensure
the screw holes face outwards (Figure 3-9).
a29z0017
8
3
8
4
1 2 5 6
10
12
a29z0019
5
6
10
1
2
12
7