IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 206 / 257

C-2
TS2900 Tape Autoloader Setup, Operator, and Service Guide
04 Library Hardware D The library mechanism has a
hardware fault that is not
mechanism related, or requires
power cycle to recover. 1. Cycle the power supply and try
again.
2. If the problem persists, see
“Contacting IBM Technical
Support” on page 7-1.
C
06 Library Interface The library has identified an
interface fault. 1. Check all cables and cable
connections.
2. Restart the operation.
3. If the problem persists, see
“Contacting IBM Technical
Support” on page 7-1.
C
08 Library Maintenance Library preventative maintenance
required. Preventative maintenance of the
library is required. Consult the library
user’s manual for device-specific
preventative maintenance tasks. W
12 Library Stray Tape A cartridge has been left in the drive
inside the library by a previous
hardware fault. 1. Try unloading the cartridge from
the drive using the Operator Panel
or Web User Interface.
• If the cartridge unloads, move
the cartridge from the drive to
the I/O Station. Remove the
cartridge and inspect for
damage. If not damaged, return
the cartridge to the library. Run
Library Verify before resuming
normal library operations.
• If the cartridge did not unload
from the drive, cycle the power
supply and try again.
2. If the problem persists, see
“Contacting IBM Technical
Support” on page 7-1.
C
13 Library Pick Retry There is a potential problem with the
drive ejecting a cartridge short or
with the library mechanism picking
a cartridge from a slot. No action is required. W
14 Library Place Retry There is a potential problem with the
library mechanism placing a
cartridge into a slot. No action is required. W
16 Library I/O Station The operation has failed because the
library I/O Station is open. Close the I/O Station. W
17 Library Mailslot Mechanical problem with the I/O
Station. There is a mechanical problem with
the library I/O Station. C
18 Library Magazine Library magazine not present. The library cannot operate without
the magazine.
1. Insert the magazine into the
library.
2. Restart the operation.
C
21 Library Offline Library manually turned offline. The library has been manually turned
offline and is unavailable for use. I
Table C-1. TapeAlert flags supported by the library (continued)
Flag
Number
Flag Name Description Action Required
Type
1