IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 98 / 257

4-20
TS2900 Tape Autoloader Setup, Operator, and Service Guide
Configuring the Library
Managing User Access
Figure 4-38. User Access screen
Use Configure Library
→
User Access to add/modify/remove additional
administrator, superuser, and user accounts, and to change passwords. Up to 7 users
can be configured using the Web User Interface.
Add, modify, or remove users using the following information:
•
Select action
– Add — To add new users.
– Modify — To change the selected user’s access role and/or password.
– Remove — To delete the selected user from the system.
• User Name — The user name of a registered user.
• Password — Case-sensitive password for the registered user.
• Role — The user access level for the registered user.
– Users are allowed to monitor the library, but not perform actions that affect the
physical library.
– Superusers are allowed to operate the physical and logical library, but not
perform actions that affect the library configuration.
– Administrator users are allowed access to the entire physical library and logical
library, including configuration. One and only one administrator user must be
assigned the login name
admin .
An administrator can add/modify/remove additional administrator, superuser, and
user accounts, and change passwords. User accounts are restricted to specific areas of
the library. For more information, see “User Privileges” on page 2-8.
A User account can be modified by an administrator to provide a user with superuser
or administrator access permissions to the library functions.
Enter all user IDs and passwords on the Library Configuration form in Appendix F,
“Library Configuration Form,” on page F-1.
Click Submit to transfer the settings to the library. A dialog message is displayed
when the settings have been updated successfully.
a29z0122