IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 160 / 257

8-12
TS2900 Tape Autoloader Setup, Operator, and Service Guide
Figure 8-22. Securing the rear of the library in the rack
8. Run the SAS cable, power cable, and Ethernet cable through the hook and loop
fastener strap , then tighten the strap (Figure 8-23).
Figure 8-23. The cables at the rear of the library
9. Remove the Accessor locking screw .
Figure 8-24. Removing Accessor locking screw
10. On the rear panel of the library:
a. Connect the SAS host interface cable.
b. Connect the Ethernet cable.
c. Connect the power cable or rack PDU line cord to the library power supply.
d. Power ON the library by toggling the power supply switch to the ON (|)
position.
11. Insert the cartridge magazine if previously removed.
12. Restore the library configuration. See “Saving and Restoring Configuration
Settings” on page 4-28.
a29z0022
10 10
12
a29z0023
12
1
a29z0026
1