IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 28 / 257

1-4
TS2900 Tape Autoloader Setup, Operator, and Service Guide
Figure 1-4. Cartridge magazine (top view)
Rear Panel
Figure 1-5. Rear panel components
Table 1-3. Rear panel component descriptions
Number Component Description
Power connector The library connects to a 110/220 volt ac power supply.
Power switch The library is powered ON when the power supply switch on the rear
panel is ON (|); the library has no independent power switch on the
front panel.
SAS host interface connector Serial-attached SCSI host interface cable connection. The Ultrium 3 and
Ultrium 4 SAS drives use the SFF-8088 connection at the drive end and
SFF-8088 or SFF-8470 at the host adapter end.
Ethernet port This port is used to connect the library to a network.
a29z0057
2 1
4 5 1 2 6
3
a29z0003
1
2
3
4