IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 70 / 257

3-26
TS2900 Tape Autoloader Setup, Operator, and Service Guide
4. Enter the trap IP addresses of the SNMP monitoring stations to be notified when
an event takes place and the security settings in the
Trap List pop-up menu.
Figure 3-27. Trap list settings
• Validity — Enable/Disable setting.
• Trap version — v1, v2c, or v3. For v2c and v3, the Inform checkbox
determines whether an SNMP INFORM request is sent instead of a trap event.
• IP address — IPv4 and IPv6 addresses are supported. Hostnames can be
entered instead of numerical IP addresses if the DNS server is specified.
• Community (v1 or v2c) — SNMP community name.
• User name (v3 only) — SNMPv3 unique user name.
• Authentication (v3 only) — Authentication algorithm, MD5 or SHA. When an
algorithm is specified, an authentication password and confirmation of the
password are required.
• Privacy (v3 only) — Privacy service encryption and decryption algorithm, DES
or AES. When an algorithm is specified, a privacy password and confirmation
of the password are required.
5. Enter the SNMPv3 users who are permitted to access the tape library in the
SNMPv3 User List pop-up menu.
Figure 3-28. SNMPv3 user list settings
• Validity — Enable/Disable setting.
• User name — SNMPv3 unique user name.
• Authentication — Authentication algorithm, MD5 or SHA. When an
algorithm is specified, an authentication password and confirmation of the
password are required.
a29z0140
a29z0141