IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 104 / 257

4-26
TS2900 Tape Autoloader Setup, Operator, and Service Guide
Configure the date and time using the following settings:
•
NTP Server — Enables time and date control using a time server on the network.
– NTP server address — The IP address of the time server. IPv4 and IPv6
addresses are supported, depending on the TCP/IP settings. Hostnames can be
entered instead of numerical IP addresses if
Use DNS is selected in the Network
settings.
– Time zone — The time zone relative to Greenwich Mean Time (GMT).
• If the time server is disabled, enter the local time and date manually.
– Date — The date using the MM/DD/YYYY format.
– Time — The time using the HH:MM:SS format.
• Auto Adjustment by PC — Select a time interval and click Start to synchronize the
library with the clock on your host computer at regular intervals. The Web User
Interface Java Applet must be running continuously to use this function.
Click Submit to transfer the settings to the library. A dialog message is displayed
when the settings have been updated successfully.
Click Refresh to read the current settings from the library.
Configuring E-mail Notifications
Figure 4-45. E-mail settings screen
Use Configure Library
→
Notifications
→
SMTP (Mail) Settings to configure the
e-mail settings for sending event information whenever an event of a certain level
occurs.
Configure e-mail notification using the following settings:
•
SMTP server address — SMTP mail server IPv4 or IPv6 address (depending on
network configuration)
• Sender address — E-mail message header information
• Subject — E-mail message header information
• Mail to — E-mail addresses of contacts to be notified of the event
• Mail event — Event level notification threshold
a29z0127