NDIS3 MAC Driver Installation for Windows 95
To install NDIS3 MAC drivers on your Windows 95 system, perform
the following steps.
1
After the adapter is installed in your computer, apply power and
boot Windows 95.
2
Log on as an administrator, if required.
3
If the New Hardware Found window is presented continue with
step 4. Otherwise go to step 5.
4
Select Driver from disk provided by manufacturer, and
then select OK.
a. You will be prompted to insert the manufacturer’s diskette.
Insert the Device Drivers diskette in drive A. Indicate the
source drive and path for the files by clicking on the
drop-down list under
Copy manufacturer's files from.
Select A:\WIN95, and then select OK.
b. The Select Device Type window is presented. Make sure
that the IBM EtherJet ISA Adapters is selected. Select OK.
c. You will be prompted to insert the Windows 95 operating
system software. Insert the diskette or CD-ROM and then
select OK.
d. Go to step 6 6.
5
a. When the Windows 95 panel is presented, select the Start
push button on the bottom left of the screen.
Adapter diskette:
Device Drivers diskette
Directory: A:\WIN95
Windows 95
Installation diskette
or
Windows 95 CD-ROM
Chapter 6. Installing the Device Drivers for Your Network Environment
6-23
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com
