Cabling Requirements
In order to connect the Ethernet adapter to your network, you will
need one of the following cables (not supplied with this kit).
A Category 3, 4, or 5 cable with RJ-45 connectors, for use with
twisted-pair (10BASE-T) cabling in your Ethernet network.
10BASE-T
Figure 3-4. 10BASE-T Cable
The maximum length of twisted-pair cable is 100 meters (328
feet).
An RG-58, standard, coaxial cable (10BASE2) with bayonet
connectors (BNCs), terminators, and a BNC T-type connector.
The T connector is shipped with your EtherJet ISA Adapter kit.
10BASE2
Figure 3-5. 10BASE2 Cable
The maximum length of thin coaxial cable is 185 meters (607
feet).
A shielded, twisted-pair drop cable with AUI connectors, if your
Ethernet network uses external transceivers.
Chapter 3. Package Contents
3-3
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com
