NDIS2 and NDIS3 MAC Driver Installation for
Windows for Workgroups 3.11
The NDIS2 or NDIS3 MAC device drivers can be installed in a
Microsoft** Windows for Workgroups environment. To do so,
perform these steps:
1
Log on as an administrator, if required.
2
From the Program Manager window double click the Network
group icon.
3
Double click the Network Setup icon in the Network window.
The Network Setup window is presented.
4
At the bottom of the screen select the Drivers... button.
5
On the Network Drivers panel, select Add Adapter.
6
Select Unlisted or Updated Network Adapter from the top of
the list box in the Add Network Adapter window and then select
OK.
7
You will be prompted for the source of the network driver files.
Check that A:\ is specified. Verify that the Device Drivers
diskette is in drive A and select OK.
8
The next window lists adapter drivers. Select NDIS2 and/or
NDIS3 and then select OK.
9
You will be returned to the Network Drivers window and your
selection should be presented in the Network Drivers list box.
Note: In cases where you are installing more than one
adapter, repeat the previous three steps for each additional
adapter that you are installing.
Specify the serial number of each adapter to each adapter
driver listed by selecting the adapter driver name and then
Adapter diskette:
Device Drivers diskette
Directory: (root)
6-20
EtherJet ISA Adapters Installation and User Guide
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com
