NetWare DOS Requester Driver Installation
1
Start the installation program from the NetWare WSDOS_1
installation diskette.
2
At the NetWare Client installation panel, make sure the
destination directory is the directory that contains your NetWare
files and that you have answered ‘yes’ to the question about
modifying your AUTOEXEC.BAT and CONFIG.SYS files.
3
Highlight the step on the panel that will select the driver.
4
Remove the NetWare WSDOS_1 installation diskette.
5
Insert the Device Drivers diskette
6
Press Enter.
7
Using the cursor keys, select IBM EtherJet ISA Adapter and
press Enter. The settings panel is displayed.
8
With the settings panel displayed, enter changes to the
configuration as required. Return to the Install panel.
9
At the NetWare Client Install panel, select the last step on the
panel and press Enter.
10
Exchange diskettes as prompted on the panel.
11
When the message is displayed on the panel stating that the
installation process has been completed, press Enter to exit
the installation program.
Adapter diskette:
Device Drivers diskette
Novell NetWare
Diskette
WSDOS_1
Note: If the NetWare DOS Client software installation package is distributed
on the CD-ROM, it must be converted to its individual component diskette
images in order to produce the NetWare WSDOS_1 install diskette.
Chapter 6. Installing the Device Drivers for Your Network Environment
6-15
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com
